Reinitialize your Holosun EPS Carry Red Dot Sight

Occasionally, you may require to restore your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the settings or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a straightforward process that can be completed in just a few actions.

Initially ensuring your red dot sight is powered on.
Identify the small reinitialize button on the rear of the unit.
Employ a small object to press and hold the reset switch for approximately three milliseconds.
Disengage the lever and your Holosun EPS Carry Red Dot sight will power cycle.
Its red dot sight should now be set back to its factory settings.

Reset Your Holosun EPS Carry Red Dot to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to return to original, resetting it back to standard configuration is a breeze. First, locate the tiny button on the side of your optic. Then, sustain it for around twelve seconds until you see a brief flash. Your Holosun EPS Carry is now returned to its factory settings, ready for consistent targeting.

restore Your Holosun EPS Carry Back to Life

Is your beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often fix the problem and get your red dot sight back to its former glory. Before you begin, remember to remove the battery from your Holosun EPS Carry to prevent unintended activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these straightforward steps:

Press and hold the power button for approximately 10 seconds.
A message will flash, indicating that the reset is in progress.
Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can insert the battery and test your sight's functionality. If you encounter any further problems, don't hesitate to reach out to their technical assistance.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Accomplish these steps carefully to ensure a successful factory reset.

Beginning with, Activate your Holosun EPS Carry by pressing the power button.
After that, press and hold both the mode button and the up/down adjustment button simultaneously.
While continue holding these buttons, press the power button once.
The display will show a confirmation prompt indicating that the reset process is initiated.
Allow the process to conclude. This may take a few moments. Once done, your Holosun EPS Carry will automatically shutdown.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Reset All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Pressing a specific button combination. Consult your Guidebook for the exact button sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select this option and confirm the reset. website Your sight will then power off and restart with all settings Restored to their default values.

Reinitialize your Holosun EPS Carry with a Factory Original Settings

If your Holosun EPS Carry is acting erratically, a factory reset might be the solution. This will return your sight to its original settings, clearing any altered configurations you've made. To execute this reset, follow these simple steps:

To begin, identify the reset switch on your EPS Carry.
Secondly, engage a thin object, like a pen tip, to depress the reset button.
As you keep the reset lever pressed, activate your EPS Carry.
It will display a message showing that the reset is complete.

Once the reset is complete, your EPS Carry will be set to its factory settings.